![](/upload/image/20190514143032_2776.jpg)
![](/upload/image/201805150001.jpg)
![](/upload/image/20190514143031_6214.jpg)
![](/upload/image/201805150002.jpg)
![](/upload/image/20190514143031_9972.jpg)
![](/upload/image/201805150003.jpg)
![](/upload/image/201805150004.jpg)
![](/upload/image/201805150005.jpg)
![](/upload/image/201805150006.jpg)
![](/upload/image/201805150007.jpg)
![](/upload/image/201805150008.jpg)
![](/upload/image/201805150011.jpg)
![](/upload/image/201805150012.jpg)
![](/upload/image/201805150013.jpg)
![](/upload/image/201805150014.jpg)
![](/upload/image/201805150015.jpg)
![](/upload/image/201805150016.jpg)
![](/upload/image/201805150017.jpg)
![](/upload/image/20181217142647_6607.jpg)
![](/upload/image/201805150022.jpg)
![](/upload/image/201805150019.jpg)
![](/upload/image/201805150020.jpg)
![](/upload/image/201805150021.jpg)
![](/upload/image/20190514143032_7307.jpg)
https://zzsnewell.fss-my.vhostgo.com//video/20220527/124SXS/1.mp4,124SXS-11000HP Scrap Shredder
1.Complete automobiles (Whole or flattened, not baled), with gasoline tanks removed.;
2.Automobile logs with density of not more than 1 tons/m³. The width or height of the log cannot exceed 90% of the feed opening to the shredder housing.;
3.Baled light iron with density of not more than 1 tons/m³. The width or height of the baled light iron cannot exceed 90% of the feed opening to the shredder housing.;
4.All types of light iron scrap, including appliances, and material normally classified as #2 heavy-melting materials, scrap steel bales, and some grades normally classified as #1 heavy-melting material.;
5.Structural shapes of steel with under 3/4 inch section thickness. The means that a standard I beam of about 18 inches can be shredded.;
6.Wire products, including pieces of cable less than 1 inch (25mm);
7.Re-bar of two inches (50mm) diameter;
8.Stainless steel, waste aluminum and baled waste aluminum etc.。
Tel:+86-18252503188
E-mail:info@zzsnewell.com